Installing The Rails - Cisco UCS 5108 Installation Manual

Installing the Rails

Caution
If the rack has wheels, ensure that the brakes are engaged, the stabilizing pads are extended, or that the rack
is otherwise stabilized.
Table 9: Contents of the Cisco UCS 5108 Server Chassis Rack-Mount Kit (N20-CRMK2=)
Quantity
1
1
6
6
Table 10: Contents of the Cisco UCS 5108 Server Round Hole Adapter Kit (N20-CRMK2-RHA=)
Quantity
4
4
4
16
Warning The plug-socket combination must be accessible at all times, because it serves as the main disconnecting
device. Statement 1019
Installing the Rails
Procedure
Step 1
Remove the mounting template (Cisco 78-19093-01) from the accessory box. The template is designed to
show you the proper holes within which the rails and cage nuts should be placed. Once the rack holes line up
with the template, you should mark the holes so that their position is known after removing the template.
Step 2
Adjust the length of the rail by sliding the ends of the rail back and forth until they match the depth of the
rack.
Cisco UCS 5108 Server Chassis Installation Guide
34
Part Description
Left tool-less rack mount rail
Right tool-less rack mount rail
10-32 X 0.75 Phillips round washer head screws
10-32 X 0.125 cage nuts
Part Description
Round hole adapters (threaded)
Round hole adapters (un-threaded)
Adapter securing screws
Phillips head screws for securing the rails to the rack
Installation