Securing The Chassis Into The Rack - Cisco UCS 5108 Installation Manual

Inserting the Chassis into the Rack
Figure 25: Securing the Chassis Into the Rack
Step 4 Replace all servers, fans, and power supplies back into their respective chassis slots.
Step 5
To power up the chassis, connect the appropriate AC power cables to the inlet connector corresponding to
each installed power supply, and then connect the other end of the cables to the power source. For a DC
installation, see
needed for a given configuration, use the
Cisco UCS 5108 Server Chassis Installation Guide
42
Connecting a DC Power Supply, on page
Cisco UCS Power Calculator
45.To determine the number of power supplies
tool.
Installation