Required Tools And Equipment; Preparing To Connect To A Network - Cisco AS5350 Installation Manual

Chapter 2 Preparing to Install the Cisco AS5350 Chassis
safely ground unwanted ESD voltages. To guard against ESD damage and shocks, the wrist strap and
cord must operate properly. If no wrist strap is available, ground yourself by touching the metal part of
the chassis.
For safety, periodically check the resistance value of the antistatic strap, which should be between 1 and
Caution
10 megohm (Mohm).

Required Tools and Equipment

The following items are included with the universal gateway:
•
•
•
•
•
•
•
•
•
•
You might need the following equipment, which is not included:
•
•
•
•
•
•

Preparing to Connect to a Network

When you set up your universal gateway, consider distance limitations and potential electromagnetic
interference (EMI) as defined by the Electronic Industries Association (EIA).
Hazardous network voltages are present in WAN ports regardless of whether power to the router is
Warning
OFF or ON. To avoid electric shock, use caution when working near WAN ports. When detaching
cables, detach the end away from the router first. To see translations of the warnings that appear in
the publication, refer to the Regulatory Compliance and Safety Information document that
accompanied this device.
78-10754-03 0A
19- and 24-inch rack-mount kits
Rubber feet for desktop installation
RJ-45-to-DB-9 female DTE adapter (labeled TERMINAL)
RJ-45-to-DB-25 female DTE adapter (labeled TERMINAL)
RJ-45-to-DB-25 male DCE adapter (labeled MODEM)
RJ-45-to-RJ-45 rollover console cable
ESD-preventive wrist strap
Nylon cable tie
Cable tie holder
Grounding lug
Straight-through RJ-45-to-RJ-45 cable for an Ethernet connection
Up to two straight-through RJ-45-to-RJ-45 cables for T1 connections
Up to two E1 cables for E1 connections
Ethernet hub or PC with a network interface card for Ethernet LAN connections
PC running terminal emulation software for local administrative access
Modem for remote administrative access
Cisco AS5350 Universal Gateway Chassis Installation Guide
Required Tools and Equipment
2-3