Table of Contents
Advertisement
2. Data Recalled From Memory
Standard color data in memory can be recalled and output using the command "Kxx", where xx is the memory
channel number from which data is desired. The data which will be recalled and output depends on the present
display mode.
When the optional 4-point expansion board CA-B04 is used
The probe connector number for which data will be output should be selected using the command:
"O probe connector number ".
In the following, "_" indicates a space.
Format: CH 1 memory channel number _ P 2 probe connector number [ 3 serial number (a) ]
[ 4 serial number (b) ] _ 5 standard color data delimiter
1 Memory channel number: Value from 00 to 99; memory channel number from which data is being recalled and
output.
2 Probe connector number: Value from 1 to 5; probe connector number for which data is being output.
3 Serial number (a): 8 characters;
For xyLv or T∆uvLv display mode: Serial number of probe used for calibration to a user-selected reference.
For analyzer (RBG) display mode: Serial number of probe used for setting RGB emission characteristics of
4 Serial number (b): 8 characters; serial number of probe used for setting standard color data.
5 Standard color data:
For xyLv or T∆uvLv display mode:
Format: x value ; y value ; Lv value
x, y values: First three decimal places output.
Lv value: Up to four characters output; if value consists of fewer than four characters, value will be
preceded by the required number of spaces.
For analyzer (RBG) display mode:
Format: R value ; B value ; G value
R, B, G values: Up to five characters output; if value consists of fewer than five characters, value will be
When the optional 4-point expansion board CA-B04 is used
Data output for more than one probe connector number can be selected if desired. If more than one probe connector
number is selected, data will be output consecutively for all selected probe connector numbers in numerical order.
Format: CH memory channel number _ P probe connector number ..... delimiter
CH memory channel number _ P probe connector number ..... delimiter
CH memory channel number _ P probe connector number ..... delimiter
∗ Standard color data is output according to the format above for the selected display mode.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
CRT phosphors.
preceded by the required number of spaces.
95
Advertisement
Table of Contents
