Table of Contents
Advertisement
Maintenance
SAFETY WARNING
If you are not going to use the instrument for a long
time, disconnect the AC power cord from the AC
outlet. Dirt or water may accumulate on the prongs
of the AC power cord's plug and it may cause a fire.
If there is any dirt or water on the prongs, it must be
removed.
Do not disassemble or modify the instrument.
Doing so may cause a fire or electric shock.
1. Cleaning the Instrument
If the instrument gets dirty, wipe it with a soft dry cloth. Never use solvents such as thinner and benzene.
If the measuring probe receptor's objective lens gets dirty, wipe it with a soft dry cloth or lens cleaning paper.
Should the instrument break down, do not try to disassemble it by yourself. Contact a Minolta-authorized
service facility.
2. Storing the Instrument
The instrument and its optional accessories should be stored within the following temperature range. Do not
store them in areas subject to high temperatures and high humidity. For added safety, it is recommended that
they be stored with a drying agent (such as silica gel) at near room temperature.
• Main body and measuring probes
4-point expansion board CA-B04
Take care not to allow condensation to form on the instrument during use.
When moving the instrument to the location where it is to be used, take care not to expose it to temperature
changes.
When storing the optional 4-point expansion board CA-B04, always put it in the anti-static bag in which the
board is supplied.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
(Failure to adhere to the following points may result in death or
serious injury.)
• Take special care not to allow liquid or metal ob-
jects to enter the instrument.
• Should liquid or metal objects enter the instru-
ment, turn the power OFF immediately, discon-
nect the AC cord from the AC outlet, and contact
the nearest Minolta-authorized service facility.
Failure to observe this may cause a fire or electric
shock.
• The instrument should not be used if it is dam-
aged, or if smoke or odd smells occur.
• If smoke or odd smells occur or if the instrument
is damaged, turn the power OFF immediately, dis-
connect the AC cord from the AC outlet, and con-
tact the nearest Minolta-authorized service facil-
ity.
Failure to observe this may result in a fire.
105
105
Advertisement
Table of Contents
