Table of Contents
Advertisement
Communications Section
This section explains communication with PC via RS-232C or
USB.
It is designed for those who possess basic knowledge of control-
ling the instrument from the PC via RS-232C and know the ba-
sic operating methods (Measurement Preparation and Measure-
ment sections).
Communicating with PC via RS-232C
Explains how to connect the RS-232C cable and select the RS-232C baud rate to enable two-way
communication with PC via RS-232C.
Communicating with PC via USB
Explains how to connect the USB cable to enable communication with PC via USB.
Remote Measurement
Explains how to perform measurement from the PC remotely.
Communication Method
Explains how to input communication commands.
Communication Format
Explains the format of commands that are input to the instrument and that of data which is output
from the instrument.
To control the instrument from the PC, use the SDK (CA-SDK) supplied with the in-
strument. For the specifications and operating method of the SDK, refer to its instruc-
tion manual. A sample program that uses SDK is also supplied.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
83
Page 84
Page 86
Page 86
Page 87
Page 90
Advertisement
Table of Contents
