Table of Contents
Advertisement
From the Measurement Preparation Section
Outline of the Settings Section
Explains measurement method types and settings that must be made.
(Find out what settings you have to make.)
Before Making Each Setting
Gives detailed explanations on memory channels common to each setting and target colors.
Selecting the Calibration Stan-
dard
Select 6
500K (D65)
Page 50
Setting/Changing the Target
Color *1
Explains how to set/change the
target color.
1. Setting/Changing the Target
Color by Measurement
2. Setting/Changing the Target
Color by Entering Values
Page 62
• To set an ID name:
"Setting an ID Name" (Page 67) *2
• To use the analog display function:
"Setting an Analog Display Range"
(Page 69) *3
To the Measurement section
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Settings Section
This section explains settings that must be made according to
measurement mode.
The setting method varies with measurement mode.
When performing measurement
When performing measurement
using Minolta's calibration standard
using user calibration
or 9300K.
User Calibration
Gives detailed explanation of user
calibration and explains its execu-
tion method.
(Target color is also set at this
time.)
• To change the target color after user calibration:
"Setting/Changing the Target Color"
(Page 60) *1
Other Settings
Explains how to set an ID name
and analog display range.
When performing measurement in
analyzer mode
Analyzer Mode
Gives detailed explanation of ana-
lyzer mode and explains how to
input the RGB emission charac-
teristic for the display's analyzer
mode.
(Target color is also set at this
time.)
Page 51
• To change the target color after the analyzer
mode RGB emission characteristic is input:
"Setting/Changing the Target Color" (Page
60) *1
Settings Checking Method
Explains how to check the set val-
ues and check the probe serial no.
used when the values are set.
Page 67
45
Page 46
Page 48
Page 58
Page 73
Advertisement
Table of Contents
