Table of Contents
Advertisement
3 Analog display section ............................ Displays the difference (%) between the measured value and the tar-
The range has been set to 10% prior to factory ship-
ment.
When xylv, T∆uvLv, u'v'Lv or XYZ measurement
mode is selected
∆x, ∆y and ∆Lv are displayed.
When an analyzer measurement mode is selected
For G-reference R/G, B/G and ∆G are displayed.
For R-reference ∆R, B/R and G/R are displayed.
4 LCD display section ................................ Displays the memory channel, probe no., ID name, warning and set-
Memory channel
(Page 48)
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
get color or the difference (%) between measured values.
The range for each dot can be set between 0.1 and 99%. (Page 69)
tings.
In case of error, an error message will appear.
(For a description of what to do in case of error, refer to page 107.)
CH00
AdP1
[MINOLTA
−
Red
-n×8%
or lower
Below ±n×2%
Below ±n×4%
Below ±n×8%
Displays the currently selected SYNC mode. (NTSC,
PAL, EXT, UNIV, INT) (Page 38)
Displays the currently selected measurement speed.
(A.F.S) (Page 36)
Displays the calibration mode for the currently selected
memory channel. (d.h.a.m) (Page 57)
Probe no. (Page 43)
]
ID name display area (Page 67)
20
Green
Red
+n×8% or
Below ±n%
higher
R/G
B/G
＋
Advertisement
Table of Contents
