Connecting A Video Source Using Hdbaset; Connecting A Video Source Using Tsic; Selecting A Video Source; Connecting To A Computer Or Server - Christie Boxer 30 Installation And Setup Manual

Connecting a video source using HDBaseT

The HDBaseT port on the IMXB accepts digital video data from HDBaseT sources.
Enables connection of one Ethernet cable to the HDBaseT port on the IMXB. The HDBaseT input
supplies the entire video raster.
This card may or may not be included with your model. Standard inputs are subject to change.

Connecting a video source using TSIC

The Terra SDVoE (TSIC) input card accepts digital video data from a Christie Terra Transmitter.
Enables a connection from an SDVOE source (such as the Christie Terra Transmitter) and routes it to
the backplane interface. Refer to the signal chart for more information about what resolution, frame
rates, and formats are supported based on the projector the card is installed in.
Input configuration Description
One-Port
This card may or may not be included with your model. Standard inputs are subject to change.

Selecting a video source

After connecting a video source to the projector and making sure your port configuration is correct,
you must select it.
1. From the display panel, select INPUT.
2. Navigate the list of input selections until you find a selection that best matches your
configuration.
3. To select the input, select Enter.

Connecting to a computer or server

Communicate with a remote computer, server, or an existing network using a RJ-45 cable.
The RS232 port located on the IMXB faceplate uses Christie-proprietary protocol and is intended for
Christie accessories or automation controllers only.
Boxer 30 (Bb.2) Installation and Setup Guide
020-102017-08 Rev. 1 (02-2019)
Copyright 2019 Christie Digital Systems USA, Inc. All rights reserved.
©
Connecting devices and establishing communication
Enables a connection from an SDVOE source (such as the
Christie Terra Transmitter) and routes it to the backplane
interface. Refer to the signal chart for more information about
what resolution, frame rates, and formats are supported based
on the projector the card is installed in.
Requirements
1 TSIC card
36