Connecting A Video Source Using Tsic; Connecting A Video Source Using Hdbaset - Christie Mirage 4K40-RGB Installation And Setup Manual

Related information
HBMIC video formats for Mirage projectors (on page 50)
Dual-input 3D for Mirage projectors (on page 55)

Connecting a video source using TSIC

The Terra SDVoE (TSIC) input card accepts digital video data from a Christie Terra Transmitter.
Part number: 144-132107-XX
The input configuration listed below is supported.
Input configuration Description
One-Port
This card may or may not be included with your model. Standard inputs are subject to change. Refer
to the Mirage 4K40-RGB Specifications Guide (P/N: 020-103016-XX) for more details.
Related information
TSIC video formats for Mirage projectors (on page 52)

Connecting a video source using HDBaseT

The HDBaseT port on the IMXB accepts digital video data from HDBaseT sources.
The input configurations listed below are supported.
Input configuration
One-Port
This card may or may not be included with your model. Standard inputs are subject to change. Refer
to the Mirage 4K40-RGB Specifications Guide (P/N: 020-103016-XX) for more details.
Related information
HDBase-T video formats for Mirage projectors (on page 55)
Mirage 4K40-RGB Installation and Setup Guide
020-103014-03 Rev. 1 (08-2019)
Copyright 2019 Christie Digital Systems USA, Inc. All rights reserved.
©
Connecting devices and establishing communication
Enables a connection from an SDVOE source (such as the
Christie Terra Transmitter) and routes it to the backplane
interface. Refer to the signal chart for more information about
what resolution, frame rates, and formats are supported based
on the projector the card is installed in.
Description
Enables connection of one Ethernet cable to the HDBaseT port
on the IMXB. The HDBaseT input supplies the entire video
raster.
Requirements
1 TSIC card
Requirements
N/A
43