Optimizing The Integrator Zoom And Focus - Christie Boxer 30 Installation And Setup Manual

Optimizing the integrator zoom and focus

1. From the Test Pattern menu, select the Integrator Rod test pattern.
The Integrator Rod test pattern includes guided information for integrator zoom and focus
adjustments.
2. Open the Service door on the side of the projector.
3. Unlock the Zoom and Focus paddles.
4. Adjust the magnification using the Zoom paddle.
Make sure you do not see any corners.
5. Adjust the focus using the Focus paddle.
Always focus the center of the image first and then make sure no blurry edges exist.
6. When complete, lock the Zoom and Focus paddles.
Boxer 30 (Bb.2) Installation and Setup Guide
020-102017-08 Rev. 1 (02-2019)
Copyright 2019 Christie Digital Systems USA, Inc. All rights reserved.
©
Installation and setup
29