Adjusting the fold mirror
Fold mirror adjustment must be completed by trained personnel and with the projector in single lamp
mode.
Notice. If not avoided, the following could result in property damage.
•
Misalignment of the fold mirror may cause permanent damage to the product.
1. From the Test Pattern menu, select the Integrator Rod test pattern.
2. Open the Service door on the side of the projector.
3. Unlock the fold mirror screws to unlock the adjustment knobs.
4. To make horizontal adjustments, use the orange knob labeled Horizontal.
5. To make vertical adjustments, use the purple knob labeled Vertical.
6. Lock the fold mirror screw to lock the adjustment knobs.
Boxer 30 (Bb.2) Installation and Setup Guide
020-102017-08 Rev. 1 (02-2019)
Copyright
2019 Christie Digital Systems USA, Inc. All rights reserved.
©
Installation and setup
28