Product Labels - Christie Boxer 30 Installation And Setup Manual

Projection lens
0.72:1 HB fixed lens
0.9:1 fixed lens
1.13-1.31:1 HB zoom lens
1.31-1.63:1 HB zoom lens
1.63-2.17:1 HB zoom lens
1.99-2.71:1 HB zoom lens
2.71-3.89:1 HB zoom lens
3.89-5.43:1 HB zoom lens
4.96-7.69:1 HB zoom lens
The following table lists the hazard distance for the Christie projector lens with the zoom adjusted to
its most hazardous position.

Product labels

Learn about the labels that may be used on the product. Labels on your product may be yellow or
black and white.
General hazards
Hazard warnings also apply to accessories once they are installed in a Christie product that is
connected to power.
Fire and Shock Hazard
To prevent fire or shock hazards, do not expose this product to rain or moisture.
Do not alter the power plug, overload the power outlet, or use it with extension cords.
Do not remove the product enclosure.
Only Christie qualified technicians are authorized to service the product.
Electrical Hazard
Risk of electric shock.
Do not remove the product enclosure.
Only Christie qualified technicians are authorized to service the product.
General hazard.
Electric shock hazard. To avoid personal injury, disconnect all power sources before
performing maintenance or service.
Boxer 30 (Bb.2) Installation and Setup Guide
020-102017-08 Rev. 1 (02-2019)
Copyright 2019 Christie Digital Systems USA, Inc. All rights reserved.
©
Part number
144-110103-XX
144-111014-XX
144-103105-XX
144-104106-XX
144-105107-XX
144-106108-XX
144-107109-XX
144-108100-XX
144-109101-XX
Hazard distance
(m)
0.6
0.7
1.1
1.3
1.7
2.2
3.1
4.2
6.0
Introduction
9