Signal Connectivity Specifications; Hbmic Video Formats - Christie Boxer 30 Installation And Setup Manual

Signal connectivity
specifications
Identify the signal connectivity specifications for Boxer 30.
The list of formats listed below are not exhaustive and other formats may be supported. For more
information, contact Christie Technical Support.
For a list of supported Christie Link video formats, see the Christie Link User Manual (P/N:
020-102234-XX).

HBMIC video formats

Identify the video formats for the HBMIC card.
DisplayPort 1.2
This interface supports HDCP 1.x.
Format
HD 1280x720
1920x1080
2048x1080
HDMI 2.0
This interface supports HDCP 1.x and 2.2.
Format
HD 1280x720
1920x1080i
1920x1080
2048x1080
SDI (HD, 3G, 6G, and 12G-SDI)
A valid SMPTE-352 payload is required for this interface.
Format Hres Vres
HD 1280x720 1280
1920x1080i 1920
Boxer 30 (Bb.2) Installation and Setup Guide
020-102017-08 Rev. 1 (02-2019)
Copyright 2019 Christie Digital Systems USA, Inc. All rights reserved.
©
Hres Vres
1280 720
1920 1080
2048 1080
Hres Vres Frame rate (Hz)
1280 720 24, 25, 30, 50, 60
1920 1080 50, 60
1920 1080 24, 25, 30, 50, 60
2048 1080 24, 25, 30, 50, 60
Frame rate (Hz) Sampling
720 24, 25, 30, 50, 60
1080 50, 60
Frame rate (Hz) Sampling
24, 25, 30, 50, 60 RGB/4:4:4
24, 25, 30, 50, 60 RGB/4:4:4
24, 25, 30, 50, 60 RGB/4:4:4
Sampling
RGB/4:4:4/4:2:2
RGB/4:4:4/4:2:2
RGB/4:4:4/4:2:2
RGB/4:4:4/4:2:2
Bit-depth
4:2:2 10bpc
4:2:2 10bpc
Bit-depth
8/10/12bpc
8/10/12bpc
8/10/12bpc
Bit-depth
8/10/12bpc
8/10/12bpc
8/10/12bpc
8/10/12bpc
Notes
—
—
47