Connecting Devices And Establishing Communication; Imxb Ports - Christie Boxer 30 Installation And Setup Manual

Connecting devices and
establishing
communication
Learn how to connect external devices to the projector.
Communication and input ports are located on the projector side input panel (operator side). The
image below shows the video option card slot numbers and the IMXB panel.
Video sources can be connected to either the ports on the video option cards or the HDBaseT port on
the IMXB.

IMXB ports

The IMXB has a variety of ports that can be used for control, 3D sync, upgrading, retrieving
interrogators, and connecting audio.
Port
Audio Out
HDBaseT
USB 1/USB 2
USB 3
Wired Keypad
Boxer 30 (Bb.2) Installation and Setup Guide
020-102017-08 Rev. 1 (02-2019)
Copyright 2019 Christie Digital Systems USA, Inc. All rights reserved.
©
Description
Not supported.
Accepts video signals, Ethernet, and IR.
Connects a USB flash drive that has been formatted with a FAT32
file system. Can be used for upgrades, backups, restores,a nd
interrogators.
For manufacturing use only.
Physically connects a remote control to the projector.
33