Very Important - Britax safe-n-sound BS0072E-i20133 Instructions For Installation & Use

TO REPLACE COVER
1. Align and fit trim cover over restraint starting at top. Attach elastic loops D.
2. Refit fabric overhang E.
3. Feed shoulder harness straps through the lap strap slots.
4. Feed crotch buckle through slot in cover and over harness adjuster strap whilst fitting the cover at the
lower part of the seat.
5. Re-attach plastic clips at the front of the seat and elastic loops F.
6. Fit headrest cover over headrest, ensure elastic is at the rear of headrest and any press studs are re-
attached to headrest cover.
7. Refit the harness strap by feeding through the appropriate shoulder strap slots. You MUST thread the
shoulder strap over the cross bar and then re-attach the straps to metal strap connector at the back of
the seat (see page 43 or 66).
8. Refit any accessories such as padded insert, shoulder pads and crotch pad (if supplied).
9. Ensure the harness straps are not twisted.
ONLY USE BRITAX SAFE-N-SOUND SEAT COVERS AND
ACCESSORIES THAT ARE DESIGNED AND TESTED FOR USE
WITH THIS PRODUCT.

VERY IMPORTANT:

Only replace the cover with Safe-n-Sound supplied
replacement cover with identical shoulder
height markers or a replacement cover meeting
AS/NZS 8005.
Instructions for Installation & Use
81