Britax safe-n-sound BS0072E-i20133 Instructions For Installation & Use page 67

ADJUSTING SHOULDER HARNESS STRAPS HEIGHT
Correct fitment of the harness is very important as it
restrains the child in the restraint. The headrest must be in
the correct position and the harness must fit firmly around
upper torso of the child and be positioned so as to leave
the child's arms and legs free.
For forward facing mode the shoulder strap slots need
to be nearest to the child's shoulders, but not lower than
25mm below the child's shoulders.
height of the headrest, thus the shoulder straps as the
child grows.
Adjust the harness to the desired position,
see page 66. Remove the accessories (if fitted) when
adjusting the straps. If your child has reached the upper
shoulder height marker then refer to page 21 for next type
of restraint.
must
Shoulder straps be threaded
directly through appropriate shoulder strap
over the top
slots then
of restraint. Harness straps must never be
routed through headrest and shell slots at
similar heights.
IMPORTANT:
Always adjust the height of the headrest, thus the shoulder straps as the child grows.
Always adjust the
of bar at rear
Metal Strap Connector
Padded Insert is not to be used when forward facing.
The shoulder straps must be in the slots
which are nearest to the child's shoulders,
but not more than 25mm below the child's
shoulders.
Straps ALWAYS
over bar
Instructions for Installation & Use
25mm
Straps NEVER
under bar
Metal Strap Connector
67