Britax safe-n-sound BS0072E-i20133 Instructions For Installation & Use page 15

Consult the car owner's handbook for location of top tether anchorage points.
An available anchor point is required to attach the top tether strap onto. The top tether strap must be used
with this child restraint when used in a road vehicle.
If there is no child restraint anchor fitting or child restraint anchor point refer to pages 85 to 88 for the
installation of the anchor fitting as well as the use of extension straps.
Select a seating position with a child restraint anchor fitting directly behind the seating position.
Determine if the vehicle ISOFIX Low Anchorages or Seatbelt will be used to secure the restraint
installation. The ISOFLEX connectors will need to be deployed from their storage location prior to adjusting
the seat recline angle to rearward facing mode.
ISOFIX COMPATIBLE WITH TOP TETHER STRAP
• If supplied with ISOFIX compatible straps the installation may be either seatbelt
strap or ISOFLEX Connectors and top tether strap.
For Rearward Facing Use - Refer to page 35 to 41
For Forward Facing Use - Refer to page 62 to 65
SEAT BELT WITH TOP TETHER STRAP
• If not supplied with ISOFIX compatible straps this seat is suitable for fitting with seatbelt and top
tether strap.
Use your vehicle seat belt and top tether strap to install this seat. Follow the directions outlined:
For Rearward Facing Use - Refer to page 28 to 34
For Forward Facing Use - Refer to page 56 to 61
and top tether
Instructions for Installation & Use
15