Britax safe-n-sound BS0072E-i20133 Instructions For Installation & Use page 31

G. If upper anchorage strap is folded up for storage
undo storage strap to lengthen. Fully press adjuster
button (1) while pulling upper anchorage strap (2) to
lengthen.
H. Fit the attachment clip to the car's anchor fitting as
shown right. Make sure to remove as many twists as
possible from the upper anchorage strap.
I. Tighten top tether strap by pulling adjustment strap to
remove slack, leave the strap slack on the side the
baby will be placed into the seat from. Any slack will
be removed once the baby has been harnessed into
the seat.
J. Remove the slack from the adjustable top tether strap
by pulling adjustment strap, With the baby in harness,
remove all slack in the top tether strap. Roll up excess
strap and store in the pocket provided on the cover.
Do not tighten the top tether strap such that the
restraint is lifted up. Remove slack only.
Always remove slack from top tether.
A loose top tether is dangerous.
CAUTION:
CHILDREN CAN BE INJURED OR RESTRAINTS AND TOP
TETHER STRAP DAMAGED BY UNSECURED CARGO IN A
COLLISION. SECURE OR REMOVE HAZARDOUS CARGO
BEFORE USING THIS CHILD RESTRAINT.
Fully press Adjuster Button (1) while
pulling Upper Anchorage Strap (2) to
lengthen.
1
Attachment Clip
Attach
Car's Anchor Fitting
Pull Adjustment Strap to remove slack
Roll up excess
strap and store
in the pocket
attached to the
cover.
Instructions for Installation & Use
2
31