Britax safe-n-sound BS0072E-i20133 Instructions For Installation & Use page 74

THIS RESTRAINT IS SUITABLE FOR USE ON AN AIRCRAFT WHEN INSTALLED
AS DIRECTED.
(AUSTRALIAN DOMESTIC FLIGHTS)
HOW TO INSTALL USING AIRCRAFT LAP BELT
The child restraint must be used in accordance with the aircraft procedures, and any
directions from the aircraft operator, pilot or crew.
Inform the aircraft operator that a child restraint is intended to be used on the aircraft when booking the
flight as the child restraint may not be suitable for use in that operator's aircraft.
Some child restraints may not fit in smaller aircraft and can not be used with aircraft seatbelts that contain
airbags unless they can be disabled.
Follow the instructions of the flight crew or pilot.
For use of the child restraint in cars in countries other than Australia and New Zealand as follows:
(A) The child restraint may not be acceptable for use in cars.
(B) The user may need to consult the country's local authorities, car hire companies, car insurance
companies, etc. for advice.
TO FIT THE CHILD RESTRAINT TO THE AIRCRAFT SEAT IN FORWARD FACING:
A. Set the recline position to fully upright. Position the restraint in forward-facing mode and align centrally
with the chosen seating position. We recommend that you fit the restraint nearest the window or in
a middle seat if in centre seating area, so it will not interfere with an adult exiting the row of seats. If
possible, lift the armrests out of the way to improve access to installing the aircraft lap belt. However
airline staff will direct you to the desired seat position.
74
Instructions for Installation & Use