Britax safe-n-sound BS0072E-i20133 Instructions For Installation & Use page 49

REMOVING CHILD FROM RESTRAINT
A. Press top tether strap adjuster button while pulling top
tether strap to slacken. Allow top tether straps to fall
to the sides for easy access into restraint and child
removed.
B. Push and hold the harness adjustment button or lever
while pulling both shoulder harness straps to fully
slacken the harness. Insert the tongues into the harness
tongue holders.
C. Press the red button on harness buckle, both harness
tongues will be released. Insert tongues into tongue
holders to hold straps away from the child. Move
shoulder straps to baby's side then remove baby.
D. To remove the seat refer to page 50 for ISOFLEX
installation or page 49 for seatbelt installation.
REMOVE RESTRAINT FROM VEHICLE
FITTED WITH SEATBELT AND TOP TETHER
A. Disengage the vehicle seatbelt buckle. Remove seatbelt
from the restraint belt paths.
B. Remove the top tether strap from pocket and fully
press top tether adjuster button (1) while pulling top
tether strap (2) to slacken as shown. In some vehicles
loosening of the top tether strap may be difficult. If so,
try pushing the restraint against the vehicle seat back or
slightly lifting the restraint to release the tension.
C. Disengage the attachment clip from upper anchorage
fitting. The child restraint is now disconnected.
D. Roll up and store the loose top tether strap in the
pocket provided to avoid tripping.
Buckle tongue
holder
Fully press Adjuster Button (1) while
pulling Upper Anchorage Strap (2) to
lengthen.
1
Instructions for Installation & Use
2
49