Britax safe-n-sound BS0072E-i20133 Instructions For Installation & Use page 34

ANGULAR ADJUSTMENT OF RESTRAINT
Some vehicle seats have more rearward slope than others. If the angle of the seat causes the baby to
be too upright for comfort, the angle may be altered by placing a firm packing between the seat and the
underside of the base. Packing can be a firmly rolled up towel.
If the car's seat is flat then some packing may be required at the front edge of the base to achieve the
recline angle.
Do not remove all of the installation angle by over packing. Always leave an angle of approximately
10°- 15°.
10° to 15°
34
Instructions for Installation & Use
The stabilising bar does
not need to contact the
seatback provided the
seatbelt is tight when
packing is used.
Rolled towel packing