Britax safe-n-sound BS0072E-i20133 Instructions For Installation & Use page 60

J. Tighten adjustable top tether strap by pulling adjustment
strap to remove slack as shown below, but do not over-
tighten causing the restraint base to lift off the vehicle
seat.
K. Fold up excess strap and use the top tether pocket to
store excess strap away from child's reach.
Always remove slack from top tether.
A loose top tether is dangerous.
IMPORTANT :
Always secure the loose end of the top tether strap to prevent it hanging out of the car or being
accessible by the child.
THIS RESTRAINT IS NOT SUITABLE FOR USE WHERE THE TOP TETHER STRAP MAY FALL
INTO A SPLIT IN THE SEAT BACK OR OFF THE SIDE OF THE SEAT.
Always ensure that the car seatbelt is firmly restraining the restraint on the vehicle seat.
ALWAYS ATTACH TOP TETHER HOOK AND REMOVE SLACK IN THE TOP TETHER STRAP.
A LOOSE TOP TETHER IS DANGEROUS.
Check that the seatbelt is not twisted and the diagonal belt is only clamped by the lock-off which is
located on the opposite side from the car seat buckle.
CAUTION:
CHILDREN CAN BE INJURED OR RESTRAINTS AND TOP TETHER STRAP
DAMAGED BY UNSECURED CARGO IN A COLLISION. SECURE OR REMOVE
HAZARDOUS CARGO BEFORE USING THIS CHILD RESTRAINT.
60
Instructions for Installation & Use
Pull Adjustment Strap to remove slack
Roll up excess
strap and store
in the pocket
attached to the
cover.