Britax safe-n-sound BS0072E-i20133 Instructions For Installation & Use page 68

STEPS IN CHANGING SHOULDER STRAP SLOTS
A. Remove the restraint from vehicle, if not already removed.
B. At the rear of the restraint, remove one of the harness
shoulder straps from Metal Strap Connector by slipping
strap through open slot.
C. Pull the shoulder straps through slot.
D. Adjust the headrest and ensure the chosen slots align with
the restraint body.
E. Insert shoulder strap through restraint slot which will
position the shoulder strap level with or above the child's
then over the metal cross
shoulder,
that the shoulder strap passes through matching slots in
cover, headrest and restraint body. If using an accessory
with slots, ensure the straps are threaded through these
before inserting the strap in the slots in the backrest.
F. Reconnect the strap to the metal strap connector.
IMPORTANT:
Ensure each shoulder strap is threaded through aligned
headrest and seat shell slots, then over the top of the bar at
the rear of restraint and connects to the metal strap connector.
Do not use the restraint with harness shoulder straps set at
different heights
or fed through mismatching slots. Ensure harness straps
are not twisted and that all straps are secure by pulling each
harness strap.
Remove accessories while adjusting harness. The
accessories are not be used once child reaches the Lower
Shoulder Height Marker or if it creates discomfort.
Do not adjust headrest position without checking harness
strap position.
68
Instructions for Installation & Use
Metal Cross
Bar
Metal
Strap
bar. Ensure
Connector
Pull
straps