Britax safe-n-sound BS0072E-i20133 Instructions For Installation & Use page 83

SEAT PROTECTOR (if supplied)
Place ribbed or pocket end of the seat protector on edge of
car seat, smooth back toward seat join ('A') and fit in any
excess into the join of the car's seat ('A'), or for the long seat
protector lay up the back of the vehicle seat.
CAUTION:
If using a pocket to store filled bottles, please ensure
contents are not contaminated due to prolonged storage.
Ensure contents are not crushed by car door when closing.
The pocket is only for small, light items. DO NOT overload
the pocket with heavy, bulky items as this may damage the
pocket or cause passengers to trip over them.
PADDED INSERT (if supplied)
Your restraint will be supplied with a padded insert which is
designed to snugly support your baby.
Discontinue use if the padded insert is a tight fit or creates
discomfort.
The padded inserts are not suitable for forward facing use.
Fit as follows:-
A. Disconnect buckle and place insert under shoulder and
lap straps.
B. Feed the crotch strap through the flap in the padded
insert and re-connect buckle.
Short Seat Protector
(If supplied)
'A'
Long Seat Protector
(If supplied)
'A'
NOTE: Some seat protector may not
have pockets.
Padded Insert
Instructions for Installation & Use
Pocket (if
featured)
Pocket (if
featured)
83