Britax safe-n-sound BS0072E-i20133 Instructions For Installation & Use page 32

FITTING SUMMARY
A single twist
is required
in rearward-
facing mode.
Pull to remove some slack - do
not over tighten when finally
adjusted with the baby
DO NOT USE RESTRAINT IN REARWARD FACING MODE
WITHOUT STABILISING BAR FULLY EXTENDED.
THE TOP TETHER STRAP MUST ALWAYS BE FITTED WHEN
THE CHILD RESTRAINT IS USED IN A VEHICLE. ALWAYS
ATTACH THE HOOK AND REMOVE THE SLACK.
32
Instructions for Installation & Use
Top tether strap slack
during harness fitting
Hook Attachment Clip to
the car's anchor fitting.
Pull sash portion of
seatbelt to remove
slack.
Feed seatbelt between restraint
cover and restraint body (see
pages 28-30).