Storage - Sungrow Logger3000 User Manual

User Manual

5.4 Storage

If the Logger3000 is not to be installed immediately after receiving, observe the
following requirements to store it properly:
The Logger3000 should be store in its original packing case and placed in a well-
•
ventilated, dry, and tidy room.
The storage carrier should be suitable for the weight of the Logger3000.
•
The storage environment should be well ventilated, dry, and without any
•
accumulated water.
Ambient temperature: -40℃ to +85℃; relative humidity: 0~95%, no condensation.
•
Take precautions to protect the device against damage due to harsh environment
•
such as shock cooling, shock heating, and collision.
Regularly inspect the Logger3000, usually at least once a week. Check the packing
•
case for intactness and replace it immediately when necessary.
Unpack and check the Logger3000 in powered on state if it has been stored more
•
than half a year.
The Logger3000 must be packed during storage!
•
Never store the Logger3000 outdoors or in a place directly exposed to!
•
No tilting or stacking!
•
After long-time storage, thoroughly check the Logger3000 and ensure it is
undamaged before installation. If necessary, install the Logger3000 only after
it has been tested by qualified personnel.
5 Unpacking and Storage
15