Country And Region Setting; About; Maintenance - Sungrow Logger3000 User Manual

User Manual

9.9.9 Country and Region Setting

According to the requirements of the grid company, the working status of the inverter
forwarded by the Logger3000 must be uploaded to the local background according to
the local standards.
Therefore, set the country and region to the location where the Logger3000 is installed
before using it.
The method is as follows:
Click "Settings" -＞ "Countries and regions" to enter the corresponding interface.
For different regions, the codes of inverter working status forwarded by the Logger3000
are shown in the table below.

9.9.10 About

This interface includes information such as the name of the Logger3000, serial number,
password, firmware version, and web version.
Click "Settings" -＞ "About" to enter the corresponding interface and view related
information.

9.10 Maintenance

On this interface, user can upgrade devices managed by the Logger3000.
The method is as follows:
step 1 Click "Maintenance" -＞ "Upgrade device" to enter the corresponding interface.
step 2 Click "browse" to select an upgrade file, and click "Upload" to upload the desired file.
step 3 Select devices to be upgraded.
9 Web Interface
49