Local Power Regulation - Sungrow Logger3000 User Manual

10 Grid Dispatching
P P a a r r a a m m e e t t e e r r
Remote
scheduling
Local
scheduling
Time
modification
- - - - E E n n d d
After saving the operations, enter the permission password Sglogger2018 to
have the settings valid.
If an error schedule is imported due to human reasons, causing abnormal
sending of control instructions, SUNGROW shall not be held liable for any
damage caused.

10.4 Local Power Regulation

The Logger3000 can regulate the power of inverter connected to it. The regulation
includes active power regulation and reactive power regulation. The method is as
follows:
step 1 Click "Power grid scheduling" -＞ "Local power conditioning" to enter the corresponding
interface.
54
D D e e s s c c r r i i p p t t i i o o n n
Tick the option "Enable EMU", enable the "Remote scheduling"
function, fill in related information, import the scheduling file, and
click "Save", to enable the remote scheduling function.
Tick the option "Enable EMU", select the "Local scheduling" function,
import the scheduling file, set the parameter type, and click "Save",
to enable the local scheduling function.
Perform modification according to actual conditions. The parameter
ranges from -10 to +10. After the modification saved, the option "-
Time settings" -＞ "Sync. PC time to Logger" will not be displayed.
When the system time of the Logger3000 ＜ the time modified
through "Time modification", or the time of the Logger3000 ＜ NTP
time,
the information "
appear on in the upper right corner of the interface. In this case, the
Logger3000 sends stop instruction to the inverter.
The information "
not disappear until operation such as "Time modification" or NTP
synchronization is performed.
User Manual
" will
" will