Sungrow Logger3000 User Manual page 61

User Manual
step 2 Tick the option "Enable" in the upper left corner and click "Save", to enable the local
regulation function.
step 3 Select the corresponding local regulation mode, for example, active power regulation
and reactive power regulation.
table 10-1 Description of active regulation parameters
P P a a r r a a m m e e t t e e r r
Active power control mode
Power rise speed (%/min)
Power drop rate (%/min)
Start time
table 10-2 Description of reactive regulation parameters
P P a a r r a a m m e e t t e e r r
Reactive power control mode
Reactive power percentage start
time
Reactive power fixed value start
time
- - - - E E n n d d
D D e e s s c c r r i i p p t t i i o o n n
The control mode is set to "Fixed value of active
power".
Rising rate of active power, ranging from 8 to
6000. For specific meanings, refer to the inverter
manual.
Decline rate of active power, ranging from 8 to
6000. For specific meanings, refer to the inverter
manual.
Click "Add", "Modify", and "Delete" to edit the
start time of the active power fixed value.
D D e e s s c c r r i i p p t t i i o o n n
Includes reactive power percentage start time
and power factor fixed value
When the reactive power control mode is set to
"reactive power percentage", the start time also
needs to be set.
Method: Click "Add", "Modify", and "Delete" to
edit the start time of the reactive power
percentage.
When the reactive power control mode is set to
"power factor fixed value", the start time also
needs to be set.
Method: Click "Add", "Modify", and "Delete" to
edit the start time of the reactive power fixed
value start time.
10 Grid Dispatching
55