3. WP8010 INSTALLATION
3. WP8010 INSTALLATION
Required tool: Philips screwdriver #2.
WP8010mounting process is shown in Figures 3.1 - 3.9.
3.1 Opening the WP8010Control Panel and Bracket Mounting
To Mount the Unit:
1. Release the screws
2. Remove the front cover
3. Mark 4 drilling points on the mounting surface
4. Drill 4 holes and insert wall anchors
5. Fasten the back unit with 4 screws
WARNING! When plugging SIREN & ZONE terminals back into place, be sure to align them carefully with the pins on the
PCB. Misaligned or reverse insertion of terminals may cause internal damage to the WP8010!
8
Figure 3.1 – Back Unit Mounting
A. Mounting surface
B. Back unit
D-306233 CUSDOC PM-10/30 V18 DSC TRIPLE EN INST