Appendix F. Powerlink3 Ip Communicator; F1. Getting Started; F2. Specifications - DSC WP8010 Installer's Manual

APPENDIX F. PowerLink3 IP Communicator

IMPORTANT NOTICE
DSC is a manufacturer and supplier of equipment. DSC DOES NOT provide PowerManage services including
event notification or other forwarding services.
In order to benefit fully from the PowerLink3 IP Communicator, it must be connected to a central monitoring
station or other service provider running DSC's PowerManage.
The PowerLink3 IP Communicator is compatible with the WP8010/WP8030 control panel version 17 and above.

F1. Getting Started

The DSC PowerLink3 IP Communicator provides a communication channel to the PowerManage server and enables you
to send events, including alarm images of PIR cameras, and to manage panel configuration. (For detailed information,
refer to the PowerManage User's Guide.)
Note: PowerLink3 IP Communicator does not include viewing by cameras or control of options via a web interface.

F2. Specifications

SOFTWARE
Security System
Management
Data Security
HARDWARE
WP8010/WP8030 Connection
Size
Weight
Color
Operating Temperature
Storage Temperature
1
PowerLink3 IP Communicator is not applicable for UL installations
2
In the menus, PowerLink3 IP Communicator appears as "Broadband" or "Broadband Module".
D-306233 CUSDOC PM-10/30 V18 DSC TRIPLE EN INST

WP8010/WP8030r events reporting to PowerManage servers

Providing communication channel to PowerManage servers

IP Address: Auto configuration or Manual Configuration

Reset to Factory Defaults Option

Remote Firmware Upgrade

AES 128 Bit encryption for SIA-IP WP8010/WP8030 events

RS-232

73 x 61.5 x 16mm (2-7/8 x 2-7/16 x 5/8 in.)

50g (1.8 oz.)

Silver

-10ºC to 55ºC (14ºF to 131ºF)

-20ºC to 60ºC (-4ºF to 140ºF)
3. WP8010 INSTALLATION
1 2
,
93