Table of Contents
Advertisement
3. WP8010 INSTALLATION
5.6 Communication
5.6.1 General Guidance – "Communication" Flow-Chart & Menu Options
The COMMUNICATION menu enables you to configure and customize the communication and reporting of alarm,
troubles and other system events for monitoring companies or private users according to your local requirements and
personal preferences. WP8010/WP8030 offers a variety of communication means including telephone PSTN landline,
Cellular GSM, GPRS, EMAIL, MMS or SMS and IP via broadband internet connection.
Notes:
1. GPRS cannot be enabled in UL Listed product.
2. SMS is a supplementary feature.
The "04.COMMUNICATION" menu contains several sub-menu options, each covering a group of configurable features
and parameters related to the communication and reporting as follows (see detailed list in Step 3 of the chart below):
Option
1:PSTN TEL LINE
2:GSM/GPRS/SMS
3:C.S. REPORTING
4:PRIVATE REPORT
5:MOTION CAMERA
6:UP/DOWNLOAD
1, 2
7:BROADBAND
To enter the "04.COMMUNICATION" menu and to select and configure an option, proceed as follows:
Step 1
Select "COMMUNICATION"
INSTALLER MODE
04.COMMUNICATION
1
Broadband is not applicable for UL installations
2
The name of the product is PowerLink3 IP Communicator
3
BB IP Retries is not relevant for UL installations
48
Description of Option Features and Parameters
Contains configurable features and parameters related to the PSTN telephone line
to which the WP8010/WP8030 is connected.
Contains configurable features and parameters related to the Cellular connection
of the WP8010/WP8030 system.
Contains configurable features and parameters related to Reporting of event
messages to Monitoring Stations via telephone, cellular or IP broadband
communication.
Contains configurable features and parameters related to Reporting event
messages to Private Users via email, telephone, MMS or SMS.
Contains configurable features and parameters related to Motion Cameras for
Video Alarm Verification and forwarding of image clips to the Monitoring Station
and other remote subscribers via e-mail and/or MMS network.
Contains configurable connection information, access permission and security
codes related to the Upload/Download procedures via PSTN or GPRS.
Contains DHCP Client settings, enables to enter LAN parameters and reset
broadband module/settings.
Step 2
Select Communication
Sub-menu option
1:PSTN TEL LINE
2:GSM/GPRS/SMS
3:C.S. REPORTING
() These options
are available only to
the "Master Installer"
Step 3
Select the "Communication" Parameter you wish to configure
AREA CODE SKIP
LINE PREFIX
DIAL METHOD
GPRS REPORT
GSM REPORT
SMS REPORT
GPRS APN
GPRS USERNAME
SIM PIN CODE
01:REPORT EVENTS
02:1st RPRT CHAN
03:2nd RPRT CHAN
04:3rd RPRT CHAN
05:DUAL REPORT
11:RCVR1 ACCOUNT
12:RCVR2 ACCOUNT
16:PSTN/GSM RCV1
17:PSTN/GSM RCV2
D-306233 CUSDOC PM-10/30 V18 DSC TRIPLE EN INST
GPRS PASSWORD
NETWORK ROAMING
GPRS ALWAYS ON
GSM KEEP ALIVE
TRANS. PROTOCOL
46:PSTN RETRIES
47:GSM RETRIES
3
48:BB IP RETRIES
51:TEL AUTO TEST
52:AUTO-TST TIME
53:COM.FAIL RPRT
PSTN FAIL
GSM/GPRS FAIL
61:RPRT CNF ALRM
Section
5.6.2
5.6.3
5.6.4
5.6.5
5.6.6
5.6.7
5.6.8
Step 4
See
5.6.2
5.6.3
5.6.4
Advertisement
Table of Contents
