Removing And Installing A Pci Riser-Card Assembly; Removing A Pci Riser-Card Assembly - Avaya Aura S8800 Maintaining

5. Gently push the drive assembly into the bay until the drive stops.
6. Push the tray handle to the closed (locked) position.
7. If the drive was hot-swapped, check the hard disk drive status LED to verify that the

Removing and installing a PCI riser-card assembly

Removing a PCI riser-card assembly

About this task
You must remove the PCI riser-card assembly to replace the PCIe card.
Maintaining the Avaya S8800 Server for Avaya Aura
1
2
3
hard disk drive is operating correctly.
After you replace a failed hard disk drive, the green activity LED flashes as the disk
is accessed. When the new drive starts to rebuild, the amber LED flashes slowly,
and the green activity LED remains lit during the rebuild process. The rebuild
process takes approximately 30 minutes. If the amber LED remains lit, the drive is
faulty and must be replaced.
Removing and installing a PCI riser-card assembly
Drive-tray assembly
Drive handle
Filler panel
®
SIP Enablement Services November 2009 27