Avaya Aura S8800 Maintaining page 24

Replace FRUs
Important:
Always use an electrostatic-discharge wrist strap or other grounding system when you work
inside the server. See
Procedure
1. Align the DIMM air baffle over the DIMMs so that the baffle pin on the left side of
2. Lower the air baffle into place. Make sure that all cables are out of the way.
3. Install the cover.
4. Reconnect the external cables and power cords.
5. Turn on the attached devices and the server.
24 Maintaining the Avaya S8800 Server for Avaya Aura
Protecting against ESD damage
the air baffle aligns with the pin hole next to DIMM connector on the system board.
See the following figure.
1
2
3
Comments? infodev@avaya.com
for more information.
Baffle pin
Baffle pin hole
DIMM air baffle
®
SIP Enablement Services November 2009