Troubleshooting Light Path Diagnostic Leds; Overspec Led Is Lit - Avaya Aura S8800 Maintaining

5. Connect a customer-provided keyboard, mouse, and monitor to the server and
Related topics:
Hard disk drive LEDs
Removing a hard disk drive
Installing a hard disk drive

Troubleshooting light path diagnostic LEDs

OVERSPEC LED is lit

The OVERSPEC LED on the light path diagnostics panel is lit when the power supplies are
using more power than their maximum rating.
Troubleshooting steps
Procedure
1. Check the power-supply LEDs for an error indication (AC LED and DC LED are not
2. Replace the server.
Related topics:
Removing a power supply
Removing a power supply
Installing a power supply
Installing a power supply
Power supply LEDs
Power supply LEDs
Maintaining the Avaya S8800 Server for Avaya Aura
• If the green activity LED is flashing and the amber status LED is lit, replace the
drive. If the activity of the LEDs remains the same, go to the next step. If the
activity of the LEDs changes, return to step 1.
check the application syslog for errors.
on page 25
on page 26
both lit, or the information LED is lit). Replace a failed power supply.
on page 31
on page 31
on page 32
on page 32
on page 51
on page 51
Troubleshooting light path diagnostic LEDs
®
SIP Enablement Services November 2009 61