Removing The Dimm Air Baffle - Avaya Aura S8800 Maintaining

Server for sip enablement services

Hide thumbs Also See for Aura S8800:

Table of Contents

Removing the DIMM air baffle

About this task

You must remove the DIMM air baffle to replace or install a memory module.

Caution:

For proper cooling and airflow, replace the air baffle before you turn on the server. Operating

the server with an air baffle removed might damage server components.

Important:

Always use an electrostatic-discharge wrist strap or other grounding system when you work

inside the server. See

Procedure

1. Turn off the server and all attached devices.

2. Label and disconnect all power cords and external cables.

3. Remove the cover.

4. Grasp the DIMM air baffle and lift the air baffle out of the server. Make sure that the

Maintaining the Avaya S8800 Server for Avaya Aura

Protecting against ESD damage

pin comes out of the pin hole on the system board to the left of DIMM connector 8.

See the following figure.

for more information.

SIP Enablement Services

Replacing memory modules

November 2009

Table of Contents