General Safety Precautions - DITEC Entrematic HomeLink E2H Installation Manual

1.

GENERAL SAFETY PRECAUTIONS

This installation manual is intended for professionally competent personnel only.
The installation, the power connections and the settings must be completed in conformity with Good
materials (plastic, polystyrene, etc.) should not be discarded in the environment or left within reach of children,
as these are a potential source of hazard.
presents a serious threat to safety.
the system and the forces developed by the automation.
tipolar disconnection switch with a contact opening gap of at least 3 mm must be included in the mains
When requested, connect the automation to an effective earthing system carried out as indicated by current
safety regulations.
During installation, maintenance and repair operations, cut off the power supply before opening the cover to
access the electrical parts.
To handle electronic parts, wear earthed antistatic conductive bracelets. The manufacturer of the motorisation
declines all responsibility in the event of components which are not compatible with the safe and correct
operation of the product.
For repairs or replacements of products only original spare parts must be used.
3
-
-