DITEC Entrematic HomeLink E2H Installation Manual page 13

9.5 Second level menu - BC (Basic Configurations)
and
Display
When enabled (ON), with every power supply connection
opening and closing end stops and/or the stop limit switches
during opening and closing operation at the speed set with
the adjustment
During the learning operation, the display visualizes the
message
NW - Selecting number of door wings.
AC - Enabling of automatic closing.
C5 - Step-by-step/opening command operation.
RM - Radio receiver functionality.
AM - AUX coupling board operation.
SS - Selection of automation status at activation.
Indicates how the control panel considers the automation at
the time of switch-on, or after a POWER RESET command.
SO - Enabling reversal safety contact functionality.
When enabled (ON) with the automation idle, if the contact
1-8 is open, all operations are prevented.
When disabled (OFF) with the automation idle, if the contact
1-8 is open, it is possible to activate the opening operation.
to select the required function
Description
.
.
-
13
OFF ON
1 2
OFF ON
STEP-BY-STEP OPENING
STEP-BY-STEP OPENING
STEP-BY-STEP OPENING
OPEN CLOSED
OFF ON
OFF ON