DITEC Entrematic HomeLink E2H Installation Manual page 21

9.8 Second level menu - SF (Special Functions)
and
The procedures to activate the functions are described in the table.
Display
SP - Setting the password
IP - Inserting the password.
RD - Resetting the basic settings (SETTINGS RESET).
memory module.
Selecting
the memory positions
panel.
to select the required function
Note: this is only possible when the password is not set.
i
The setting of the password prevents unauthorised personnel from accessing
selections and adjustments.
It is possible to annul the set password by selecting the sequence JR1=ON,
JR1=OFF, JR1=ON.
Note: this is only possible when the password is set.
i When the password is not inserted, it is possible to access the visualisation
mode regardless of the selection made with JR1.
When the password is inserted, it is possible to access the maintenance mode.
2 s
2 s
and
Description
(EXAMPLE) 2 s
(EXAMPLE)
2 s
(EXAMPLE)
2 s
only with the storage module present on the control
21