Adjustments - DITEC Entrematic HomeLink E2H Installation Manual

9. ADJUSTMENT
NOTE: before making all the automation adjustments, insert the dedicated memory module and press
, or load the
power is connected or in the case of motor non-selection, the display will block all operations and give
an error message.
i
WARNING: the pressure on the keys can be quick less than 2 s or prolonged longer than 2 s . nless
speci ed otherwise, quick pressure is intended.
To con rm the setting of a parameter, prolonged pressure is necessary.
9.1
Switching on and off
The procedure to switch on the display is as follows:
The procedure to switch off the display is as follows:
NOTE: the display switches off automatically after 60 s of inactivity.
9.2
Key combinations
(Interruption of the power supply and restart of the automation).
con guration applying to the automation installed see options . When the
and ENTER performs an opening command.
+ =
and ENTER performs a closing command.
+ =
and performs a POWER RESET command.
+ =
10