Table of Contents
Advertisement
Display
SM - Selection of the operating mode of photocell terminals
1-6. (only with
00 - During manoeuvre, the opening of the safety contact
stops movement with disengagement.
01 - During manoeuvre, the opening of the safety contact
stops movement with disengagement. When the contact
is reclosed the interrupted manoeuvre resumes.
02 - During manoeuvre, the opening of the safety contact
stops movement with disengagement. When the contact
is reclosed an opening manoeuvre starts.
03 - During a closing manoeuvre, the opening of the safety
contact reverses the movement.
TN - Setting intervention temperature for NIO anti-freeze
system. [°C]
DOES NOT refer to outside temperature.
TB - View control panel temperature.
DO NOT USE
OL - Selecting open gate indicator light mode.
When set ON, the light is switched off when automation is
closed; it is switched on when automation is open and during
the opening and closing phases.
When set OFF the light is switched off when automation is
during the opening and closing phases.
i
WARNING: it is possible that, owing to the type of automation and control panel, certain menus are not
available.
Description
).
26
STOP +
STOP +
DISENGAGE
RESUME
STOP +
REVERSE
OPENING
CLOSING
-6 ºC
+6 ºC
OFF
ON
FLASHING
ON
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Entrematic HomeLink E2H and is the answer not in the manual?