DITEC Entrematic HomeLink E2H Installation Manual page 19

9.7 Second level menu - RO (Radio Operations)
and
The procedures to activate the functions are described in the table.
Display
SR - Transmitter memory storage.
It is possible to directly access the Transmitter memory storage menu with the display
switched off, but only with Display visualization mode set at 00 or 03:
- by transmitting a remote control not present in the memory,
- by transmitting an unstored channel of a remote control already present in the me-
ER - Deleting a single transmitter.
2 s
EA - Total memory deleting.
2 s
EC - Deleting a single code. (FUTURE USE)
RE - Setting memory opening from remote control.
When enabled (ON) remote programming is activated. To
memorise new transmitters without using the control panel,
GOL4 transmitter for 5 seconds until the LED switches on
the new transmitter.
NOTE: make sure that undesired transmitters are not acci-
dently memorized.
MU - Setting the maximum number of transmitters that can
be memorized on a memory module.
It is possible to memorise up to 100 or 200 rolling code
transmitters.
NOTE: it is necessary to set
system con guration to be saved on the memory mo-
dule
to select the required function
mory.
2 s
Description
...x2, x3...
to allow the
19
OFF ON
200 100