Table of Contents
Advertisement
Chapter
6
This chapter provides information about the set up of the PL's Windows
Windows
6.1
Setting Up Your PL OS
The Digital Electronics Corporation has prepared the following additional pro-
gram files which are not supported by the standard versions of the Windows
Windows
files must be installed from the additional "PL-X900 Series Driver & Ultility
Disk" and the "USB Touch Panel Control Utility Disk".
To set up the OS with these files, you will need to prepare one of the FDD units,
the PL-FD200 or the PL-FD210 (only for the PL-B910/PL-B900), and a PS/2
compatible keyboard.
The software contained in the PL's accompanying "PL-X900 Series Driver &
Ultility Disk" and the "USB Touch Panel Control Utility Disk" is designed spe-
cifically for use with only the Windows type of OS. If this software is used with
other OS types, its performance cannot be guaranteed.
PL-B900 Series units
(PL-B900/PL-B901)
PL-B910 Series units
(PL-B910/PL-B911)
Be sure to read the Driver and Utility Disk README documents prior to using the
PL unit, since they contain the latest PL related information and manual updates.
PL-B900/B910 Series Users Manual
OS Setup
98 Second Edition, or Windows
®
98 Second Edition and Windows NT
®
PL Model
Windows ® 95, Windows ® NT
6-1
Setting Up Your PL OS
NT operating systems (OS).
®
4.0 operating systems. These
®
OS Type
Windows ® 98
Second Edition
®
95,
®
Utility Disk
PL-X900 Series Driver and
Ultility Disk
PL-X900 Series Driver and
Ultility Disk
USB Touch Panel Control
Utility Disk
95,
6-1
Advertisement
Table of Contents
