Table of Contents
Advertisement
5. 2. 9
Selecting INTEGRATED PERIPHERALS SETUP menu item displays the
following screen.
OnChip IDE First Channel
IDE Prefetch Mode
IDE HDD Block Mode
IDE Primary Master PIO
IDE Primary Slave PIO
IDE Primary Master UDMA
IDE Primary Slave UDMA
Onboard FDC Controller
Onboard Serial Port 1
Onboard Serial Port 2
UR2 Mode
Onboard Parallel Port
Parallel Port Mode
OnChip IDE First Channel
!
Designates the internal IDE port's setting. The two selections available are
[Disabled] and [Enabled]. The [Enabled] selection is factory set and
recommended for most users.
IDE Prefetch Mode
!
Designates if the IDE drive's high speed access is performed by enabling the
Prefetch Mode. The two selections available are [Disabled] and [Enabled].
The [Disabled] selection is factory set and recommended for most users.
IDE HDD Block Mode
!
Designates the Hard disk's Block Operation Mode. The two selections
available are [Disabled] and [Enabled]. The [Disabled] selection is factory
set and recommended for most users.
IDE Primary Master PIO
!
Designates the Master Drive's PIO (Programmed Input/Output Mode. Only
after the "Internal PCI/IDE" has been set to [Primary] can these IDE Primary
Master PIO settings be entered. The selections available are [Auto], [Mode0],
[Mode1], [Mode2], [Mode3], and [Mode4]. When using the CD-ROM unit,
set this to "Mode 2".
5-14
INTEGRATED PERIPHERALS
ROM PCI/ISA BIOS(2A5LEU1C)
INTEGRATED PERIPHERALS
AWARD SOFTWARE, INC.
:Enabled
:Disabled
:Disabled
:Auto
:Auto
:Auto
:Auto
:Enabled
:3F8/IRQ4
:2F8/IRQ3
:Standard
:3BC/IRQ7
:SPP
* The above settings are factory settings.
However, with a PL-B910/PL-B911 (PL-B910 series) unit,
change the [Onboard Serial Port 4] setting to [Disabled],
change the [IDE Primary Master UDMA] to [Disabled], and change
the [IDE Primary Slave UDMA] to [Disabled]
Onboard Serial Port 3
Serial Port 3 Use IRQ
Onboard Serial Port 4
Serial Port 4 Use IRQ
ESC: Quit
↑↓→←
F1 : Help
PU/PD/+/-:Modify
F5 : Old Values
(Shift)F2:Color
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
PL B900/B910 Series Users Manual
System Setup
: 3E8H
: IRQ9
: 2E8H
: IRQ10
:Select Item
Advertisement
Table of Contents
