Connectiong The Cd-Rom Unit (Pl-Dk200) - PROFACE PL-B910 Series User Manual

3.1.7 Connecting the CD-ROM Unit (PL-DK200)
When using the CD-ROM unit, be sure to change the System Information area's "In-
tegrated Peripherals" [IDE Primary Master PIO] and [IDE Primary Slave PIO] set-
tings to [Mode 2], or set [IDE Primary Master UDMA] or [IDA Primary Slave UDMA]
to [Disabled].
! ! ! ! ! PL-B900 Unit
! ! ! ! ! PL-B901 Unit
PL B900/B910 Series Users Manual
5.2.9 Integrated Peripherals.
Connected to
CD-ROM
Connected to
CD-ROM
1) Unscrew the two(2) IDF I/F cover's
attachment screws, and remove the
cover.
2) Connect the CD-ROM unit cable to
the PL's IDF I/F connector.
Be sure that the cable is
securely connected
before turning ON the
PL's power switch.
1) Unscrew the two(2) IDF I/F cover at-
tachment screws, and remove the
cover.
2) Connect the CD-ROM unit's cable
to the IDF I/Fconnector.
Be sure that the cable is
securely connected
before turning ON the
PL's power switch.
3-10