Bios Features Setup - PROFACE PL-B910 Series User Manual

5.2.2 BIOS FEATURES SETUP

Selecting the BIOS FEATURES SETUP menu item calls up the following screen.
Virus Warning
CPU Internal Cache
External Cache
Quick Power On Self Test
Boot Sequence
Boot Up Floppy Seek
Boot Up NumLock Status
Boot Up System Speed
Gate A20 Option
Memory Parity/ECC Check
Typematic Rate Setting
Typematic Rate(Chars/Sec)
Typematic Delay (Msec)
Security Option
PCI/VGA Palette Snoop
OS Select For DRAM > 64MB
! Virus Warning
Designates whether a warning message appears when an error occurs
during a write to the Hard Disk's Boot Sector. The two selections are
[Disabled] and [Enabled]. The [Disabled] selection is factory set and
recommended for most users.
! CPU Internal Cache
Designates if the CPU's Internal Cache Memory is used or not. The
two selections available are [Disabled] and [Enabled]. The [Enabled]
selection is factory set and recommended for most users.
! External Cache
Designates if the CPU's External Cache Memory (L2) is used or not.
The two selections available are [Disabled] and [Enabled]. The
[Enabled] selection is factory set and recommended for most users.
! Quick Power On Self Test
Designates if a simplified Self Test is used after the power is turned
ON. The two selections available are [Disabled] and [Enabled]. The
[Enabled] selection is factory set and recommended for most users.
! Boot Sequence
Designates the drive order used by the OS during start up.
The [A,C,SCSI] is factory set and recommended for most users. The
other available settings are [A,C,SCSI], [C,A,SCSI], [C,CDROM,A],
[CDROM,C,A], [D,A,SCSI], [SCSI, A,C,], [SCSI,C,A] and [C Only].
5-4
ROM PCI/ISA BIOS(2A5LEU1C)
BIOS FEATURES SETUP
AWARD SOFTWARE, INC.
Video BIOS
:Disabled
C8000-CBFFF Shadow
:Enabled
CC000-CFFFF Shadow
:Enabled
D0000-D3FFF Shadow
:Enabled
D4000-D7FFF Shadow
:A,C,SCSI
D8000-DBFFF Shadow
:Enabled
DC000-DFFFF Shadow
:On
:High
:Fast
:Enabled
:Disabled
ESC :Quit
:6
:250
F1 : Help
:Setup
F5 : Old Values
F6 : Load BIOS Defaults
:Disabled
:Non-OS2
F7 : Load Setup Defaults
* The above settings are factory settings.
PL B900/B910 Series Users Manual
System Setup
Shadow : Enabled
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
: Select Item
$ % &
PU/PD/+/- : Modify
(Shift)F2 : Color