Table of Contents
Advertisement
3.1.3 Installing the FDD Unit (PL-FD200)
The PL-FD200 and the PL-FD210 cannot be used at the same time.
PL B900/B910 Series Users Manual
1) Remove the two (2) attachment
screws from the lowermost Expan-
sion Slot Cover, and remove the
cover.
Lowermost Cover
Attachment Screws
2) Insert the FDD unit so that its guide
grooves fit the slot's guide ways.
Push the unit in until its rear con-
nector is connected securely.
3) Secure the unit in place with its
two(2) attachment screws.
3-5
Advertisement
Table of Contents
