Table of Contents
Advertisement
3.1.8 Attaching the Display Expansion Board (PL-PE200)
PL B900/B910 Series Users Manual
1) Unscrew the PL's two (2) Attach-
ment Screws and remove Cover A.
(outermost cover)
Be sure to place the PL unit
on a flat, lever surface prior
to installing the PL-PE200.
This will prevent damage to
the PL and the accidental cut-
ting of any of its power cord
terminals.
2) Unscrew the three (3) Attachment
Screws and remove Cover B. (inner
cover)
3) After checking that the PL and the
PL-PE200 connectors are correctly
aligned, insert the PL-PE200's
three (3) attachment screws re-
moved in step 2) and secure the
unit in place.
• Be sure to handle the Dis-
play Expansion Board
carefully since it contains
precision components.
• Be sure to insert the Board
into place carefully, us-
ing only the necessary
amount of force.
4) Reattach Cover A and secure it in
place with its two (2) Attachment
Screws.
3-11
Advertisement
Table of Contents
