Installing The Dim Module (Pl-Em220 / Pl-Em230) - PROFACE PL-B910 Series User Manual

3.1.2 Installing the DIM Module (PL-EM220 / PL-EM230)

• Since DIM module sockets are easy to break, be sure to install the
DIM module very carefully.
• Do not change the factory installed DIM module's socket position.
The PL comes with a single, 64MB DIM module pre-installed. There is one more
empty socket that can be used and the procedures that follow describe how to
install a second DIM module in that socket.
B u i l t - i n D I M
Module
Empty Socket
" " " " " To Remove the DIM Module
When removing the module from its socket, press down on the socket's ejector
tabs to release the module.
PL B900/B910 Series Users Manual
Positioning grooves
Positioning pins
1) Install the DIM expansion module
in the empty socket.
2) Adjust the foolproof positioning
grooves so that they align with the
foolproof positioning pins.
3) Insert the DIM module into the
DIM module socket.
4) Push the DIM module down until
the ejector tabs lock.
5) Replace the rear maintenance cover
and the half cover and secure them
in place with the attatchment
3-4